Поддон для душа RGW AWF-21 120x90--> 100--> Wi-Fi роутер NETGEAR FVG318

Wi-Fi роутер NETGEAR FVG318


Reviewed by:
Rating:
5
On 02.01.2019

Summary:

.

Wi-Fi роутер NETGEAR FVG318

Πятипoзициoннaя пoлимepнaя тaĸтичecĸaя pyĸoять FVG-5В (САА Тасtісаl) пpимeняeтcя для лyчшeгo yдepжaния opyжия вo вpeмя cтpeльбы и пpицeливaния, мoжeт ycтaнaвливaтьcя нa любoe oгнecтpeльнoe, пнeвмaтичecĸoe opyжиe, ocнaщeннoe…


Обзор:

The NETGEAR FVG318 ProSafe 802.11G Wireless VPN Firewall 8 offers the small office an all-in-one solution 5 a space-saving 5 combining wired and wireless connectivity, a NAT router, VPN appliance, SPI 5, and an eight-port Ethernet switch.

Wi-Fi роутер NETGEAR FVG318

Wired and Wireless Connectivity
PKPOWER AC Adapter for NETGEAR G54 Wireless Router WGR614V10, NETGEAR DSA-12RN-12AEU 5, MV12-Y120100-B2, NETGEAR FVG318 ProSafe 802.11G Wireless VPN Firewall Power Supply HCD12200 Charger 5 /> NetGear FVG318 ProSafe 802.11g Wireless VPN Firewall overview and full product specs on CNET.

Best 5. All the best products.

Wi-Fi роутер NETGEAR FVG318

Editors' Choice Versus Best Headphones Best Laptops Best Phones.
Aug 13, 2011 · Find helpful customer reviews 5 review ratings for NETGEAR FVG318 ProSafe 802.11G Wireless VPN Firewall 8 at Amazon.com.

Read honest and unbiased product reviews from 5 users.

Wi-Fi роутер NETGEAR FVG318


Netgear FVG318 - ProSafe 802.11g Wireless VPN Firewall 8 Router Configuration Manual (11 pages) Configure VPN between ProSafe VPN Client Software and FVG318 NETGEAR does not assume any liability that may occur due to the use or application of the product s or circuit layout s described herein.
Español Por medio de la presente NETGEAR Inc.
Voluntary Control Council for Interference VCCI Statement This equipment is in the second category information equipment to be used in a residential area or an adjacent area thereto and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing Equipment and Electronic Office Machines aimed at preventing radio interference in such residential areas.
C-7 Configuring the VPN Tunnel.
C-7 Viewing and Editing the VPN Parameters.
C-8 Initiating and Checking the VPN Connections.
C-9 The FVG318-to-FVL328 Case.
C-10 Configuring the VPN Tunnel.
The information in this manual is intended for readers with intermediate computer and Internet skills.
Your computer must have the free Adobe Acrobat reader installed in order to view and print PDF files.
The FVG318 allows Internet access for up to 253 users.
The VPN firewall provides you with multiple Web content filtering options, plus browsing activity reporting and instant alerts—both via e-mail.
A Powerful, True Firewall with Content Filtering Unlike simple Internet sharing NAT firewalls, the FVG318 is a true firewall, using stateful packet inspection to defend against hacker attacks.
Both the LAN and WAN interfaces are autosensing and capable of full-duplex or half-duplex operation.
The VPN firewall allows several networked PCs to Облегченный мужской халат Alan (EFW) an Internet account using only a single IP address, which may be statically or dynamically assigned by your Internet service provider ISP.
This technique, known as NAT, allows the use of an inexpensive single-user ISP account.
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer.
Keep the carton, including the original packing materials, in case you need to return the firewall for repair.
The FVG318 Front Panel The front panel of the VPN firewall contains the status LEDs described below.
Viewed from left to right, describes the LEDs on the front panel of the firewall.
These LEDs are green when lit.
To connect the FVG318: 1.
Connect the VPN firewall router to your computer and modem a.
Turn off and unplug your cable or DSL modem.
Securely insert one end of the NETGEAR cable that came with your FVG318 into a Local port on the router such as port 4 point C in the illustrationand the other end into the Ethernet port of your computer point D in the illustration.
First, plug in and turn on the cable or DSL modem.
Wait about 2 minutes.
Now, plug in the power cord to your FVG318 and wait about 30 seconds.
Last, turn on your computer.
If https://kolopoka.ru/100/su-vid-steba-sv-100.html 2 minutes the power light turns solid amber, see the Troubleshooting Tips in this guide.
If after 2 minutes it is still on, see the Troubleshooting Tips in this guide.
When prompted, enter admin for the firewall User Name and password for the firewall Password.
Both fields are case-sensitive.
For security reasons, the firewall has its own User Name and Password.
The WAN ISP Settings screen will display.
Click Auto Detect at the bottom of the Узнать больше здесь ISP Settings screen.
The router will automatically attempt to detect your connection type.
A message will display indicating if the service connection was detected.
See the procedure on how to do this.
Manually Configuring your Internet Connection Unless your ISP assigns your configuration automatically via DHCP, you will need the configuration parameters from your ISP.
Enter the password you use to log in to your ISP.
This is usually provided by the ISP or your network administrator.
Select your Domain Name Servers DNS.
Domain name servers DNS convert Internet names such as www.
To use this feature, you must select a service provider and obtain an account with them.
Select an NTP Server.
If this is enabled, then the RTC Real-Time Clock is updated regularly by contacting a NETGEAR VX-454 Рация Vertex Server on the Internet.
Connecting the Firewall to the Internet v1.
Always follow this sequence: 1 Unplug and turn off the modem, FVG318, and computer; 2 plug in and turn on 5 modem, wait two minutes; 3 plug in the FVG318 and wait 30 seconds; 4 turn on the computer.
Accessing the firewall router continued Firewall State Access Options Configuration Enter the standard Settings Have Been URL to access the Applied VPN firewall router Enter the IP address of the VPN firewall.
You should also select the physical placement of your FVG318 in order to maximize the network speed.
For further information on wireless Монитор Acer ED323QURwidpx, refer to in Note: Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to the VPN firewall router.
You can allow only trusted PCs to connect so that unknown PCs cannot wirelessly connect to the FVG318.
Restricting access by MAC address adds an obstacle against unwanted access to your network, but the data broadcast over the wireless link is fully exposed.
The very strong authentication along with dynamic per frame rekeying of WPA and WPA2 make it virtually impossible to compromise.
Because this is a new standard, wireless device driver and software availability may be limited.
The FVG318 will automatically adjust to the 802.
This field identifies the region where the FVG318 can be used.
It may not SOS Накопительный электрический водонагреватель Aquahot EWH H 100 как legal to operate the wireless features of the VPN firewall router in a region other than one of those identified in this field.
Only select 5 if all clients support WPA2.
If selected, you must use AES encryption — WPA-PSK and WPA2-PSK: This selection allows clients to use either WPA with TKIP encryption or WPA2 with AES encryption.
Wireless is the default FVG318 SSID.
However, you may customize it by using up to 32 alphanumeric characters.
Write your customized SSID on the line below.
Note: The SSID in the VPN firewall router is the SSID you configure in the wireless adapter card.
Choose a suitable descriptive name for the wireless network name SSID.
In the SSID box, enter a value of up to 32 alphanumeric characters.
The default SSID is NETGEAR.
Note: The characters are case sensitive.
An access point always functions in infrastructure mode.
Check that they have a wireless link and are able to obtain an IP address by DHCP from the VPN firewall router.
To remove a MAC address from the table, click to select it, then click Delete.
In the Wireless Security Type section, select the WEP radio box.
The WEP fields section will be highlighted.
Choose the Authentication Type Automatic, Open System or Shared Key and Encryption Strength options.
These hex values are not case sensitive.
Select which of the four keys will be used and enter the matching WEP key information for your network in the selected key box.
Select the WPA radio box and then select RADIUS from the WPA with: pull-down menu in the Wireless Security Type section.
The RADIUS settings fields in the Radius Server Settings section will be highlighted.
Furthermore, client software is required on the client.
Windows XP and Windows 2000 with Service Pack 3 do include the client software that supports WPA2.
Nevertheless, the wireless adapter hardware and driver must also support WPA2.
For WPA2 with RADIUS, AES is used.
Enter the Radius Server Settings.
Select the WPA and WPA2 radio box and then select RADIUS from the WPA with: pull- down menu in the Wireless Security Type section.
The RADIUS settings fields in the Radius Server Settings section will be highlighted.
Furthermore, client software is required on the client.
Windows XP and Windows 2000 with Service Pack 3 do include the client software that supports WPA.
Nevertheless, the wireless adapter hardware and driver must also support WPA.
For WPA+PSK, TKIP is used.
Enter a word or group of printable characters in the Passphrase box.
Select the WPA2 radio box and then select PSK from the WPA with: pull-down menu in the Wireless Security Type section.
The PSK settings fields in the PSK Settings section will be highlighted.
Furthermore, client software is required on the client.
Windows XP and Windows 2000 with Service Pack 3 do include the client software that supports WPA and WPA2.
Nevertheless, the wireless adapter hardware and driver must also support WPA and WPA2.
For WPA and WPA2+PSK, TKIP+AES is used.
Enter a word or group of printable characters in the Passphrase box.
Up to 32 words in an Internet sites name for example, a website URL can be specified causing the site to be blocked.
Some of these components can be used by malicious websites to infect computers that access them.
A proxy server allows computers to route connections to other computers through the proxy, thus circumventing certain firewall rules.
Check the Yes radio box in the Content Filtering section нажмите чтобы перейти click Apply.
This will enable content filtering and allow you to specify Web Components to be blocked.
Check the radio box for each Web Component you want to enable; then click Apply.
The selected Web Component options will be blocked.
In the appropriate field add the IP Address or Domain Name.
The IP Address or Domain Name will appear in the appropriate table.
Click Edit adjacent to the entry to modify or change the selected IP Address or Domain Name.
Inbound Rules По этому сообщению Forwarding Because the FVG318 uses Network Address Translation NATyour network presents only one IP address to the Internet, and outside users cannot directly address any of your local computers.
Outbound Rules Service Blocking The FVG318 allows you to block the use of certain Internet services by PCs on your network.
This is called service blocking or port filtering.
When a computer is designated as the Default DMZ Server, it loses much of the protection of the firewall, and is exposed to many exploits from the Internet.
Although the FVG318 already holds a list of many service port numbers, you are not limited to these choices.
Use the Services menu to add additional services and applications to the list for use in defining firewall rules.
From the Type pull-down menu, select whether the service uses TCP, UDP or ICMP as its transport protocol.
Enter the lowest port number used by the service in the Start Port field.
The Schedule 1 screen will display.
In the Scheduled Days section, select the All Days or Specific Days radio box.
If you want to limit access completely for the selected days, select All Day.
Enter the Log Identifier in the Log Options sections.
Every logged message will contain a prefix for easier identification of the source of the message.
The Log Identifier will be prefixed to both e-mail and Syslog messages.
Check the Yes radio box if you wish to receive e-mail logs from the firewall.
Enter your E-Mail Address information.
If you enabled e-mail notification, these boxes cannot be blank.
This e-mail address will also be used as the Send To E-mail address.
If you leave this box blank, log and alert messages will not be sent via e-mail.
Log entry descriptions Field Description Date and Time The date and time the log entry was recorded.
Description or The type of event and what action was taken if any.
Basic Virtual Private Нажмите чтобы прочитать больше />The FVG318 supports both of these types of VPN configurations.
The VPN firewall supports up to eight concurrent tunnels.
VPN tunnels also enable access to network 5 across the Internet.
Basic Virtual Private Networking Table 5-1 on page 5-4.
The WPN Wizard screen will display.
Check the VPN Client radio button and enter the Connection Name and the pre-shared key.
This example assumes the PC running the client has a dynamically assigned IP address.
Basic Virtual Private Networking.
Select All in the Protocol menu to allow all traffic through the VPN tunnel.
Enter the public WAN IP Domain Name of the FVG318 in the field directly below the ID Type menu.
Configure the VPN Client Identity.
Provide information about the remote VPN client PC.
You will need to provide: — The Pre-Shared Key that you configured in the FVG318.
Configure the VPN Client Authentication Proposal.
Provide the type of encryption DES or 3DES to be used for this connection.
This selection must match your selection in the FVG318 configuration.
Configure the VPN Client Key Exchange Proposal.
Provide the type of encryption DES or 3DES to be used for this connection.
This selection must match your selection in the FVG318 configuration.
To check the VPN connection.
The NETGEAR ProSafe client will report the results of the attempt to connect.
Since the remote PC has a dynamically assigned WAN IP address, it must initiate the request.
After a short wait, you should 5 the login screen of the VPN Firewall Router unless another PC already has the FVG318 management interface open.
Invoke the NETGEAR ProSafe VPN Client and select Import Security Policy from the File pull-down menu.
Select the security policy to import.
To configure a gateway-to-gateway VPN tunnel using the VPN Wizard.
Both local and remote ends must be defined as either IP addresses or Internet Names FQDNs.
Click Apply to complete the configuration procedure.
The IKE Policies menu will display the local and remote WAN connection points as shown below.
Click the VPN Policy to display the VPN Policies showing that the new tunnel is enabled.
Log in to the VPN Firewall Router.
Click Connect adjacent to the policy to get the VPN tunnel you want to activate.
Figure 5-29 This will cause a continuous ping to be sent to the first FVG318.
After a short wait, you should see the login screen of the VPN Firewall Router unless another PC already has the FVG318 management interface open.
This page lists the following data for each active VPN Tunnel.
Select the checkbox adjacent to the policy you want to disable and click disable.
The VPN Policy will be перейти на страницу />Figure 5-32 Using the VPN Status Page to Deactivate a VPN Tunnel To use the VPN Connection Status screen to deactivate a VPN tunnel: 1.
Define the authentication scheme and automatically generate the encryption keys.
Since VPN policies use IKE policies, you define the IKE policy first.
The FVG318 also allows you to manually input the authentication scheme and encryption key values.
In the case of manual key management there will not be any IKE policies.
VPN Manual and Auto Policy Configuration Fields Field General Description These settings identify this policy and determine its major characteristics.
The IP address or Internet name FQDN of the remote gateway or client PC.
VPN Manual and Auto Policy Configuration Fields continued Field Manual Policy Parameters SPI-Incoming; SPI-Outgoing Takes a hexadecimal value between 3 and 8 источник статьи for example: Encryption Algorithm: Integrity Algorithm: Auto Policy Parameters.
Each CA has its own certificate.
The certificates of a CA are added to the FVG318 and then can be used to form IKE policies for the user.
Once a CA certificate is added to the FVG318 and a certificate is created for a user, the corresponding IKE policy is added to the FVG318.
If the certificate is not present in the CRL it means that the certificate is not revoked.
IKE can then use this certificate for authentication.
Figure 6-4 Gateway A connects the internal LAN 10.
You can verify this by reviewing the security settings as seen in.
Configure the WAN Internet Address читать далее to the settings above and click Apply to save your settings.
After applying these changes, all traffic from the range of LAN IP addresses specified on FVG318 A and FVG318 B will flow over a secure VPN tunnel.
Using our example, from a PC attached to the FVG318 on LAN A, on a Windows PC click the Start button on the task bar and then click Run.
Note: Before completing this configuration scenario, make sure the correct Time Zone is set on the FVG318.
Select the desired option: MD5 or SHA1.
Select the desired option: DSS or RSA.
Select the desired option: 512, 1024, or 2048.
Click Generate The FVG318 generates a pending Self Certificate Request as shown below.
Click view to display the data.
Highlight, copy, and paste this data into a text file.
Now, the traffic from devices within the range of the LAN subnet addresses on FVG318 A and Gateway B will be authenticated using the certificates rather than via a pre-shared key.
Viewing VPN Firewall Router Status Information The Router Status menu provides status and usage information.
Wireless Configuration The wireless settings of the router SSID: The name of your wireless network.
The default is NETGEAR.
Mode Security Settings Shows what security has been associated with the wireless configuration.
The default is none.
FVG318 Status fields Field Description Eksi Тостер конвеерный eksi het-300 Address The IP address used by the Local LAN port of the firewall.
The default is 192.
The default is 255.
Download and unzip the new software file from NETGEAR and save it to a location on your local drive.
In the Router Upgrade section, click Browse and then browse to the location of the binary.
Highlight the file and click Upload.
Note: When uploading software to 5 VPN firewall, it is important not to interrupt the Web browser by closing the window, clicking a link, or loading a new page.
NETGEAR recommends that you change this password to a more secure password.
Configuring Dynamic DNS If your network has a permanently assigned IP address, you can register a domain name and have that name linked with your IP address by public Domain Name Servers DNS.
However, if your Internet account uses a dynamically assigned По ссылке address, you will not know in advance what your IP address will be, and the address can change frequently.
If your dynamic DNS provider allows the use of wildcards in resolving your URL, you may select the Use wildcards как сообщается здесь box to activate this feature.
If your network has a requirement to use a different IP addressing scheme, you can make those changes in this menu.
Under normal circumstances, the firewall has adequate routing information after it has been configured for Internet access, and you do not need to configure additional static routes.
You must configure static routes only for unusual cases such as multiple firewalls or multiple IP subnets located on your network.
Type the Destination IP Address of the final destination.
Type the IP Subnet Mask for this destination.
If the destination is a single host, type 255.
Type the Gateway IP Address, which must be a firewall on the same LAN segment as the firewall.
Select the Yes radio box for Allow Remote Management.
Note: For enhanced продолжить чтение, restrict access to as few external IP addresses as practical.
For example, type tracert yourFVG318.
SNMP Administration Simple Network Management Protocol SNMP lets you monitor and manage your router from an SNMP Manager.
Enter the IP address of an SNMP trap agent.
Enter the Subnet Mask.
The network mask used to determine the list of allowed SNMP managers.
This feature should be used with caution as it breaches firewall security.
If the error persists, you have a hardware problem and should contact technical support.
If all the LEDs stay on, there is a fault within the firewall.
To check the WAN IP address: 1.
Under the Maintenance heading, select Router Status 4.
The device then responds with an echo reply.
Testing the Path from Your PC to a Remote Device After verifying that the LAN path works correctly, test the path from your PC to a remote device.
Use this method for cases when the administration password or IP address are not known.
Press and hold the Reset button until the Test LED turns on and begins blinking about 10 seconds.
Your device will return to the factory configuration settings shown in below.
Network Protocol and Standards Compatibility По ссылке and Routing Protocols: Power Adapter North America: United Kingdom, Australia: Europe: Japan:.
Log in to the router at Gateway A.
Use the VPN Wizard to 5 this router.
The login address will change to the local LAN IP subnet address after you configure the router.
The user name and password will also change to https://kolopoka.ru/100/kaminnaya-vityazhka-miele-da-279-alu.html ones you have chosen to use in your installation.
Use the VPN Wizard to configure the FVG318 at Gateway A.
Test 1: Ping Remote LAN IP Address: To establish the connection between the FVG318 Gateway A and Gateway B tunnel endpoints, perform these steps at Gateway A: a.
From a Windows PC attached to the FVG318 on LAN A, click the Start button on the task bar and then click Run.
Test 1: Ping Remote LAN IP Address: To establish the connection between the FVG318 Gateway A and FVS318v2 Gateway B tunnel endpoints, perform these steps at Gateway A: a.
FVG318 Figure C-5 Use this scenario illustration and configuration screens as a model to build your configuration.
Test 1: Ping Remote LAN IP Address: To establish the connection between the FVG318 Gateway A and FVL328 Gateway B tunnel endpoints, perform these steps at Gateway A: a.
From a Windows PC attached to the FVG318 on LAN A, click the Start button on the task bar and then click Run.
Policy Summary VPN Consortium Scenario: Type of VPN Security Scheme: Date Tested: IP Addressing: NETGEAR-Gateway A NETGEAR-Client B Client-to-Gateway VPN Tunnel Overview The operational differences between gateway-to-gateway and client-to-gateway VPN tunnels are summarized as follows: Table C-5.
Set up the VPN Client at Gateway B.
Right-mouse-click the ProSafe icon Editor.
If you need to install the NETGEAR ProSafe VPN Client on your PC, consult the documentation that came with your software.
Select Security Policy on the left hierarchy menu and then select Aggressive Mode under Select Phase 1 Negotiation Mode see Mode choice must match the Exchange Mode setting for the General IKE Policy.
Domain Name must match the Remote Identity Data parameter of the IKE Policy Configuration screen shown in.
Initiating and Checking the VPN Connections You can test connectivity and view VPN status information on the FVG318 and VPN Client according to the testing flowchart shown in A LAN, do the following: 1.
Test 3: View VPN Tunnel Status: To view the FVG318 event log and status of Security Associations, go to the FVG318 main menu VPN section and click the VPN Status link.

Комментарии 3

Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *